BL460 G1 and BL460 G7 (308 Views)
Reply
Occasional Contributor
Charles Berlinguette
Posts: 3
Registered: ‎12-02-2002
Message 1 of 2 (308 Views)

BL460 G1 and BL460 G7

Hi, I need to do a firmware update a on C7000 enclosure with BL460 G1 and BL460 G7.

There is a mix of Windows, ESX3.5 and Linux servers installed in a C7000 enclosure. Best practice would dictate that I also update the PSP's to match the firmware?

So when reading the HP BladeSystem Matrix 6.2 Compatibility Chart, it mentions that I should run PSP 8.60 with firmware 9.20. Does this apply when using mixed OS or just BladeSystem Matrix systems?
Honored Contributor
Cederberg
Posts: 553
Registered: ‎07-03-2007
Message 2 of 2 (308 Views)

Re: BL460 G1 and BL460 G7

Hi.

The Bladessytem Matrix compatability chart specifies what to run on the Bladesystem Matrix.

Singel c7000 chassis you should use the release sets availible at the compatablility tab on this page.
http://h18004.www1.hp.com/products/blades/components/c-class.html#tab3_content

The PSP is recommended to always use the latest. (But with causion of course).
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.