BL 465 G7 / C3000 - Windows 2003 Standard - install issues BSOD (407 Views)
Reply
Occasional Advisor
p33tew
Posts: 9
Registered: ‎08-24-2011
Message 1 of 3 (407 Views)

BL 465 G7 / C3000 - Windows 2003 Standard - install issues BSOD

Installing windows 2003 std sp1 on a bl 465 g7 and during setup/install of windows I got  a BSOD  (see pic)

 

I know that there is a critical update for storage controller HPCISSS2.sys but I need to install  recovery console for windows 2003 sp1 then sp2. During install of sp2 I had a BSOD!!!

I have also had windows EMS freeze and also multiple BSOD and then windows installs finally...

 

However this is a major waste of time of having to rebuild ...there must be a simple explaination...

 

I had reset the blade to factory default and reinstalled with different results...freezing, BSOD...

Firmware 9.30, SmartStart 8.70 x86- installing via ILO in blade chassis.

Any suggestions...

 

 

 

 

 

thanks
Please use plain text.
Trusted Contributor
Casper42
Posts: 260
Registered: ‎10-07-2010
Message 2 of 3 (387 Views)

Re: BL 465 G7 / C3000 - Windows 2003 Standard - install issues BSOD

Slipstream the latest drivers and SP into a single installer and use that.

Please use plain text.
Occasional Advisor
p33tew
Posts: 9
Registered: ‎08-24-2011
Message 3 of 3 (383 Views)

Re: BL 465 G7 / C3000 - Windows 2003 Standard - install issues BSOD

Or turn off EMS in BIOS and it works.

thanks
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation