VC Modules stacking between VC Flex-10 10G and HP VC Flex-10/10D (119 Views)
Reply
Occasional Contributor
Xubair
Posts: 6
Registered: ‎04-02-2012
Message 1 of 2 (119 Views)

VC Modules stacking between VC Flex-10 10G and HP VC Flex-10/10D

Hi,

 

We have one c7000 enclosure equipped with 2 x VC Flex-10 10G modules (pair) installaed in bay 1 and 2 now we have another c7000 enclosure equipped with 2 x HP VC Flex-10/10D modules in bay1 and bay2.

I want to stack both enclosures, can I stack both enclosures equipped with different VC modules ?

If yes what ports will be used to built this stacking as Flex-10 10G has cx4 port for uplink and FLex10/10D does not have this one.

 

Thanks,

Xubair.

Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 23,200
Registered: ‎10-02-2001
Message 2 of 2 (116 Views)

Re: VC Modules stacking between VC Flex-10 10G and HP VC Flex-10/10D

AFAIR in a multi enclosure VC domain all enclosures must have the same module configuration (same count, same models).

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation