Re: Multiple VC domains, internetworking (152 Views)
Reply
Occasional Visitor
emulric
Posts: 2
Registered: ‎12-18-2013
Message 1 of 3 (159 Views)

Multiple VC domains, internetworking

[ Edited ]

Hi,

 

What solutions have people deployed to interconnect multiple VC domains. I have 16 C7000 at present in a solution with Flex10, so 4 VC domains - Looking for advice on how to interwork them. Blades in each domain may need to talk to each other so that is the purpose of interconnection.

 

Been looking at FC switches, any advice ?

 

Thanks

 

 

P.S. This thread has been moved from Server Blades to Virtual Connect. -HP Forum Moderator

Acclaimed Contributor
Torsten.
Posts: 23,303
Registered: ‎10-02-2001
Message 2 of 3 (154 Views)

Re: Multiple VC domains, internetworking

The question is not clear, at least to me...

> Blades in each domain may need to talk to each other ...
> Been looking at FC switches, any advice ?

They "talk" to each other via network of course, what is the problem with FC switches?



Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Visitor
emulric
Posts: 2
Registered: ‎12-18-2013
Message 3 of 3 (152 Views)

Re: Multiple VC domains, internetworking

[ Edited ]

What FC switches would you go for ? Would I need 2 switches per c7000 ? or just enough to interconnect the domains (2 cables per domain - active/standby  10G links) ? Currently every chassis has 2 Flex10 in place.

 

Sorry if unclear, not a expert with Flex10 yet.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.