SSD to HDD on BL660c Gen8 question. (147 Views)
Neighborhood Admin
Posts: 4,021
Registered: ‎01-09-2007
Message 1 of 1 (147 Views)

SSD to HDD on BL660c Gen8 question.

Annie had a customer question:




Customer asked what’s the supported process to replace the two internal 200GB SSD drives on his BL600c Gen8 to two 450GB HDD. These SSDs are configured RAID 1. I think  if  he takes out the SSD drive from slot 2 and insert the HDD, this will allow the controller to mirror data from SSD drive in slot 1 to HDD in slot 2.  When it is done, he can move the HDD to slot 1, insert the other HDD to slot 2 to repeat the mirroring process. Will the controller work when there are two different drive types presence? Or there is a better method to replace these drives?




Input from Hiro:





You can’t include different type of drives in the same array.




Other comments or suggestions for Annie?


The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.