Re: IML problem entry after Chassis firmware upgrade (533 Views)
Reply
Occasional Contributor
Steve-T
Posts: 5
Registered: ‎12-08-2011
Message 1 of 3 (545 Views)

IML problem entry after Chassis firmware upgrade

I recently upgraded the OA firmware in a c7000 Blade Chassis.

 

Now, on some of my servers in that chassis, I have an IML log entry:

 

Chassis Enclosure Serial Number XXXXXXX requires minimum firmware revision 03.10.  It is currently 04.01.

 

Any idea why this happens.

Screen shot attached.

 

Thanks,

Steve

Acclaimed Contributor
Torsten.
Posts: 23,285
Registered: ‎10-02-2001
Message 2 of 3 (538 Views)

Re: IML problem entry after Chassis firmware upgrade

not enough information, but ilo and bios are likely still too old.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Contributor
Steve-T
Posts: 5
Registered: ‎12-08-2011
Message 3 of 3 (533 Views)

Re: IML problem entry after Chassis firmware upgrade

Torsten, thank you for your reply.

 

The blade is a BL460c G7.  As part of the same upgrade, I upgraded the iLO 3 and did a ROM flash.  I wanted to apply the ROM flash because HP stated there was a critical update required.

 

My server runs WIndows 2008 (not R2).

 

I will attach screen shots of the firmware and software I have.

Thanks,

Steve

 

 

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.