IML problem entry after Chassis firmware upgrade (428 Views)
Reply
Occasional Contributor
Steve-T
Posts: 5
Registered: ‎12-08-2011
Message 1 of 3 (428 Views)

IML problem entry after Chassis firmware upgrade

I recently upgraded the OA firmware in a c7000 Blade Chassis.

 

Now, on some of my servers in that chassis, I have an IML log entry:

 

Chassis Enclosure Serial Number XXXXXXX requires minimum firmware revision 03.10.  It is currently 04.01.

 

Any idea why this happens.

Screen shot attached.

 

Thanks,

Steve

Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 23,129
Registered: ‎10-02-2001
Message 2 of 3 (421 Views)

Re: IML problem entry after Chassis firmware upgrade

not enough information, but ilo and bios are likely still too old.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
Occasional Contributor
Steve-T
Posts: 5
Registered: ‎12-08-2011
Message 3 of 3 (416 Views)

Re: IML problem entry after Chassis firmware upgrade

Torsten, thank you for your reply.

 

The blade is a BL460c G7.  As part of the same upgrade, I upgraded the iLO 3 and did a ROM flash.  I wanted to apply the ROM flash because HP stated there was a critical update required.

 

My server runs WIndows 2008 (not R2).

 

I will attach screen shots of the firmware and software I have.

Thanks,

Steve

 

 

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation