HP ROM-Based Setup Utility User Guide - Latest! (8682 Views)
Neighborhood Admin
Posts: 3,321
Registered: ‎01-09-2007
Message 1 of 3 (8,682 Views)

HP ROM-Based Setup Utility User Guide - Latest!

ProLiant servers all come with a configuration utility that is embedded in the on board system ROM.

This ROM-Based Setup Utility (RBSU) performs a wide range of configuration activities

that may include:

Configuring system devices and installed options

Displaying system information

Selecting the primary boot controller

Configuring online spare memory


RBSU is available in two interfaces: a menu-driven interface and a BIOS Serial Command Console

(CLI) interface.


With the recent release of the ProLiant Gen8 servers, the RBSU User's Guide has been updated. Here is the latest and greatest.





Or use: http://www.hp.com/support/RBSU_UG_en


Let us know if yoou have any questions or comments.

Occasional Visitor
Posts: 1
Registered: ‎03-04-2014
Message 2 of 3 (4,860 Views)

Re: HP ROM-Based Setup Utility User Guide - Latest!



I notice that the updated RBSU guide for G8s, specifically excludes the DL580G8. Is there a guide specific to it?


I have a customer who needs to disable cores on the 580G8, and I want to make sure this functionality is implemented on this platform.



HP Pro
Posts: 1
Registered: ‎04-28-2013
Message 3 of 3 (4,616 Views)

Re: HP ROM-Based Setup Utility User Guide - Latest!

The RBSU user guide excludes the DL580 Gen8 because that server is UEFI-based.


The doc set you need for the DL580 Gen8:




I am an HP employee.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.