HP BL460c G7 Recovery Boot ISO or DVD (539 Views)
Reply
Occasional Contributor
Posts: 4
Registered: ‎12-07-2011
Message 1 of 3 (539 Views)

HP BL460c G7 Recovery Boot ISO or DVD

Does HP have a Recovery Boot ISO or DVD for BladeServers? Something like Hirens Boot CD or Ultimate Boot CD.

It must contain CNA drivers.

If so, could someone point me in the right direction please?

Thanks in advance.

Honored Contributor
Posts: 1,246
Registered: ‎06-26-2001
Message 2 of 3 (501 Views)

Re: HP BL460c G7 Recovery Boot ISO or DVD

Not sure if this is what you are looking for, but for G7's and below HP offers "SmartStart"

 

http://h18004.www1.hp.com/products/servers/management/smartstart/index.html

 

Its an installer helper and diagnostic CD.

 

 

 

-Bob

Trusted Contributor
Posts: 279
Registered: ‎10-07-2010
Message 3 of 3 (489 Views)

Re: HP BL460c G7 Recovery Boot ISO or DVD

We also have the STK which contains all the right drivers for a ISOlinuz or WinPE type boot disk if you want to roll your own. Also includes a ton of CLI tools for configuring BIOS, RAID, iLO, etc from that same boot image or PXE server.

Usually found here: http://www.hp.com/go/ProLiant/STK
But for some reason the latest 9.50 links aren't published yet. You can find those here:
Linux: http://www.hp.com/swpublishing/MTX-1596b4817bfc4421801b41d468
Windows: http://www.hp.com/swpublishing/MTX-7b349415c7d840fd93bed15c25
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.