HP BL460c G7 Boot-From-SAN Windows Server 2012 (1793 Views)
Reply
Occasional Advisor
jackrush
Posts: 12
Registered: ‎12-08-2010
Message 1 of 4 (1,793 Views)
Accepted Solution

HP BL460c G7 Boot-From-SAN Windows Server 2012

Hello
I'm trying to install an operating system on a diskless server Bl 460 G7. On P6350 EVA array I create a discs and present to blade servers. Servers use the built-in converged adapters, in BIOS of EMULEX adapter disks are visible. And when I try to install windows, OS can not see the disk. How to solve this problem?

Honored Contributor
Johan Guldmyr
Posts: 3,853
Registered: ‎06-14-2009
Message 2 of 4 (1,789 Views)

Re: HP BL460c G7 Boot-From-SAN Windows Server 2012

Hi,

at least for FC HBAs you need a "boot from SAN" driver.

Which CNA is that? The NC533i?

There are some drivers here:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4324630&lang=en&cc=us...

Maybe Windows 2012 don't work so well yet?
Occasional Advisor
jackrush
Posts: 12
Registered: ‎12-08-2010
Message 3 of 4 (1,779 Views)

Re: HP BL460c G7 Boot-From-SAN Windows Server 2012

Yes, adapter is NC533i.

The driver whitch I has downloaded from the link above but the disc is still not visible.

I also tried installing Win2008r2 and also failed, can not see drives  from EVA.

Disks are visible only when I boot from Smartstart DVD.

 

No one faced a similar problem?

 

Occasional Advisor
jackrush
Posts: 12
Registered: ‎12-08-2010
Message 4 of 4 (1,768 Views)

Re: HP BL460c G7 Boot-From-SAN Windows Server 2012

Problem solved.
The disc was presented for 255 LUN, vmvare and smartstart seen him without a problem, but the windows did not see ... I changed the LUN and disc saw.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.