Re: Firmware update of NC551i fails using Service Pack 2013.09 (596 Views)
Reply
Occasional Contributor
Anders Gregersen
Posts: 5
Registered: ‎02-01-2005
Message 1 of 3 (634 Views)
Accepted Solution

Firmware update of NC551i fails using Service Pack 2013.09

Hi

 

I'm trying to update the firmware on our NC551i (installed in a BL465G7) using Service Pack 2013.09 (cp019369), but the update fails. The installed firmware is 2.102.453.0. The server runs ESXi 5.0.

 

Flash Engine exit code: 2

Flash complete [7]

 

Return code: 7

Visitor
formulator
Posts: 4
Registered: ‎08-03-2011
Message 2 of 3 (618 Views)

Re: Firmware update of NC551i fails using Service Pack 2013.09

Had a similar issue last week and was able to update using the Emulex OneConnect iso:

 

http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5033634&sp...

 

 

Using SUM online on Windows blades I've not had this problem.  Also not had this problem offline on blades that have newer firmwares to begin with.

Occasional Contributor
Anders Gregersen
Posts: 5
Registered: ‎02-01-2005
Message 3 of 3 (596 Views)

Re: Firmware update of NC551i fails using Service Pack 2013.09

Worked for me too

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.