Re: BL8x0c i2 - How do you locate the HP Smart Array P410i Controller (204 Views)
Reply
Occasional Contributor
mrkejames2
Posts: 4
Registered: ‎09-06-2013
Message 1 of 2 (231 Views)

BL8x0c i2 - How do you locate the HP Smart Array P410i Controller

[ Edited ]

I am trying to see if there is a way to find out the firmware version of the BL890c i2 blade HP Smart Array P410i Controller that my system is running.  I am not in a position to shut it down, as I think it does display it during boot time.  Is there a way to view the version through an OpenVMS lexical, or from the iLO?   Thanks!

 

 

P.S. This threadhas been moved from Servers > Integrity Servers to HP BladeSystem Virtual Connect. - Hp Forum MOderator

HP Pro
Holger G
Posts: 51
Registered: ‎11-16-2010
Message 2 of 2 (204 Views)

Re: BL8x0c i2 - How do you locate the HP Smart Array P410i Controller

Hi,

 

you may either check the console log on the iLO for the last boot up or use MSA$UTIL.

 

The console log on iLO (hpiLO-> CL) should contain a line like the following for each P410i controller:
  HP Smart Array P410i Controller (version 5.16)
  Currently the controller is in RAID mode

 

The MSA$UTIL should give firmware information with the show version command (MSA> show version).

 

Kind Regards

Holger

Was this post useful? - You may click the KUDOS! Star.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.