BL460 Gen8 and 2012 Hyper-V free (755 Views)
Reply
Highlighted
Frequent Advisor
Posts: 49
Registered: ‎07-19-2000
Message 1 of 5 (755 Views)
Accepted Solution

BL460 Gen8 and 2012 Hyper-V free

Hi, have anyone tried to install the all free Windows Server 2012 Hyper-V on a bl460 Gen8?
I have updated the IP to v1.40, but as I could not get this to work.

I then booted on the free Hyper-V ISO, but was missing the disk driver. Tried to add the Smart Array SAS/SATA controller driver (P220i), but no disk was found.

Anyone else with success on this?

HP Pro
Posts: 395
Registered: ‎01-10-2012
Message 2 of 5 (735 Views)

Re: BL460 Gen8 and 2012 Hyper-V free

You may try this driver:

 

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...

 

 

 

 

Regards,

 

Vijayasarathy

I work for HP
To say thanks click the white "thumbs up" icon below!!!
Frequent Advisor
Posts: 49
Registered: ‎07-19-2000
Message 3 of 5 (727 Views)

Re: BL460 Gen8 and 2012 Hyper-V free

That's the driver I tried and then a rescan, but no disk showed up.

Frequent Advisor
Posts: 49
Registered: ‎07-19-2000
Message 4 of 5 (712 Views)

Re: BL460 Gen8 and 2012 Hyper-V free

I startet up the node again today, and this time the BIOS said "reseat the storage controller" because of some power thing. I did, and then the bl460 Gen8 never powered on. Support comes tomorrow to replace the motherborad.

Visitor
Posts: 2
Registered: ‎05-31-2012
Message 5 of 5 (635 Views)

Re: BL460 Gen8 and 2012 Hyper-V free

I got it to install, but I can only get one of the network port to be visible in the network settings. Has anyone been able to get both port to show?

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.