Re: Unable to overwrite firmware - HP GbE2c Layer 2/3 Ethernet Blade Switch (1230 Views)
Reply
Occasional Contributor
svrool
Posts: 1
Registered: ‎06-14-2013
Message 1 of 2 (1,265 Views)

Unable to overwrite firmware - HP GbE2c Layer 2/3 Ethernet Blade Switch

Hi,

 

I've tried upgrading the firmware of my HP GbE2c Layer 2/3 Ethernet Blade Switch.

This procedure has obviously failed, see "attachment1.png".

 

To communicate with the switch I'm using Hyper Terminal in Windows XP and a serial cable to connect to the switchs serial/management port.

 

The "firmware overwriting process" seem fine until the *.bin files (GbE2c_528.binGbE2c_b_528.bin) are about to get extracted. Please see "attachment2.png".

 

The *.bin files are transfered to the switch via XMODEM.

 

would appreciate your help very much,

since I've Googled couple of days now.

 

Best regards,

Oliver

Please use plain text.
Advisor
Joaragon
Posts: 22
Registered: ‎05-16-2013
Message 2 of 2 (1,230 Views)

Re: Unable to overwrite firmware - HP GbE2c Layer 2/3 Ethernet Blade Switch

Have you tried the firmware upgrade tool? It's included with the firmware file and it has always done the trick for me.

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation