02-11-2014 10:27 PM
we have 2 C7000 Chassis with 2 HP Gbe2c L2/L3 Switch in each of them. The problem is that the Switches in the first Chassis are online, but no access is possible
Host is up (0.041s latency).
Not shown: 997 closed ports
PORT STATE SERVICE
22/tcp open ssh
80/tcp open http
443/tcp open https
But when i try to connect, nothing happens, only timeout.
The only way to reconnect is to reset the blade switches which is a bad solution ;-)
The Switches in the other bladecenter are running fine.
All have the same firmware + boot firmware (5.2.9)