6125 blade switches and console (171 Views)
Reply
Regular Visitor
Aboven
Posts: 3
Registered: ‎03-25-2014
Message 1 of 3 (171 Views)
Accepted Solution

6125 blade switches and console

Hi! 

Currently on the back of the C7000 I have two 6125  blade switches in the enclosure (attach OA scr.jpg).

When you try to connect to one of them in the console, I see the characters (attach Scr console.jpg).

To connect using cabel RJ45-DB9 and programm PuTTY (attach Scr conf Putty.jpg).

I tried to change the "Remot character set" in PuTTY, but to no avail.

Need some help.

P.S.: Sorry for my English skills. I used an online translator (

Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 23,253
Registered: ‎10-02-2001
Message 2 of 3 (169 Views)

Re: 6125 blade switches and console

I did this some time ago with default putty settings, but from the OA.

ssh to the OA, then "connect inerconnect ..." to the switch.
Better results?

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
Regular Visitor
Aboven
Posts: 3
Registered: ‎03-25-2014
Message 3 of 3 (157 Views)

Re: 6125 blade switches and console

[ Edited ]

Torsten thanks, it works!

I asked ip adress for both switches.  But they unknown by the console (attach Scr1.jpg).

Directly on the Web interface are available.

How to manually specify "Managment IP address" and Managment URL ?

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation