04-01-2014 04:16 AM
Currently on the back of the C7000 I have two 6125 blade switches in the enclosure (attach OA scr.jpg).
When you try to connect to one of them in the console, I see the characters (attach Scr console.jpg).
To connect using cabel RJ45-DB9 and programm PuTTY (attach Scr conf Putty.jpg).
I tried to change the "Remot character set" in PuTTY, but to no avail.
Need some help.
P.S.: Sorry for my English skills. I used an online translator (
Solved! Go to Solution.
04-01-2014 04:19 AM
ssh to the OA, then "connect inerconnect ..." to the switch.
Hope this helps!
There are only 10 types of people in the world -
those who understand binary, and those who don't.
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
04-01-2014 10:42 PM - edited 04-02-2014 12:44 AM
Torsten thanks, it works!
I asked ip adress for both switches. But they unknown by the console (attach Scr1.jpg).
Directly on the Web interface are available.
How to manually specify "Managment IP address" and Managment URL ?