Upgrading OA 3.31 -> 3.60 and VC 3.30 -> 3.60 (437 Views)
Reply
Honored Contributor
The Brit
Posts: 1,291
Registered: ‎06-18-2007
Message 1 of 5 (437 Views)

Upgrading OA 3.31 -> 3.60 and VC 3.30 -> 3.60

We are looking at upgrading 4 of our enclosures (mix of proliants and Itaniums) from/to the above versions.     (being forced by the arrival of a new enclosure at 3.60/3.60, and to accomodate blade upgrades to G8's)

 

Is anyone aware of any issues/problems with this upgrade??

 

thanks

 

Dave.

Acclaimed Contributor
Torsten.
Posts: 23,450
Registered: ‎10-02-2001
Message 2 of 5 (435 Views)

Re: Upgrading OA 3.31 -> 3.60 and VC 3.30 -> 3.60

[ Edited ]

It may depend - latest versions are 3.71 for OA and 3.75 for VC, but NOT supported for all servers/VC modules.

You should check what the latest supported versions are for your equipment.


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Honored Contributor
The Brit
Posts: 1,291
Registered: ‎06-18-2007
Message 3 of 5 (431 Views)

Re: Upgrading OA 3.31 -> 3.60 and VC 3.30 -> 3.60

not really looking beyond 3.60 for OA or VC, unless they provide fixes for serious bugs.     Just trying to get all enclosures to same, consistent FW.

 

Our newest enclosure came with 3.60/3.60 so that is our goal.    

 

I am checking out more recent versions to see if they justify moving the goal.

 

thanks

 

Dave.

Respected Contributor
Psychonaut
Posts: 214
Registered: ‎08-31-2011
Message 4 of 5 (425 Views)

Re: Upgrading OA 3.31 -> 3.60 and VC 3.30 -> 3.60

[ Edited ]

I'd take the VC's to 3.70 (there isn't much different between 3.70 and 3.75) - you get the advanced telemetry/statistics and the fun GUI interface to see them.  I am running 3.60/3.70 without issue.  

 

Edit: I went 3.30 -> 3.51 -> 3.70.  I believe there was a bug if you went 3.30 -> 3.60 that was resolved with 3.70.  

Acclaimed Contributor
Torsten.
Posts: 23,450
Registered: ‎10-02-2001
Message 5 of 5 (421 Views)

Re: Upgrading OA 3.31 -> 3.60 and VC 3.30 -> 3.60

AFAIR there was a problem with updating to 3.60, so the recommended step was -> 3.51->3.60, but solved in 3.70.
Caution, some VC modules don't support a newer version than 3.60.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.