Upgrading C7000 enclosure and Blade Firmware using SIM (1905 Views)
Reply
Occasional Contributor
Posts: 6
Registered: ‎12-02-2007
Message 1 of 4 (1,905 Views)

Upgrading C7000 enclosure and Blade Firmware using SIM

Does anyone have any information about how to upgrade the firmware on a number of C7000’s and Blades using HP SIM
Frequent Visitor
Posts: 3
Registered: ‎11-07-2006
Message 2 of 4 (1,425 Views)

Re: Upgrading C7000 enclosure and Blade Firmware using SIM

This would be good to know if anyone knows how to perform this from HP SIM.
Advisor
Posts: 15
Registered: ‎06-20-2011
Message 3 of 4 (1,258 Views)

Re: Upgrading C7000 enclosure and Blade Firmware using SIM

Hi,

 

I'm in the same situation, we have a number of enclosues and it would be really good if there are a way to uppgrade them in one bundle.

Honored Contributor
Posts: 747
Registered: ‎10-26-2005
Message 4 of 4 (1,253 Views)

Re: Upgrading C7000 enclosure and Blade Firmware using SIM

Hi,

 

The tool that U need is HP SUM Smart Update Manager... Check the latest version 5.0 included in the latest HP SPP Service Pack for Proliant on www.hp.com/go/spp

 

SIM can be used to schedule deployments with HP SUM but is not mandatory...

 

 

Kr,

Bart Heungens

--------------------------------------------------------------------------------
If my post was useful, clik on my KUDOS! "White Star" !
My blog: http://blog.bitcon.be
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.