Onboard Administrator (OA) USB connect question (395 Views)
Neighborhood Admin
Posts: 3,291
Registered: ‎01-09-2007
Message 1 of 1 (395 Views)

Onboard Administrator (OA) USB connect question

James was working with a customer:




I have a large storage customer asking me the following question:


We've been using the thumb drives connecting to OnBoard Administrator.  I know when we started using them we formatted them as FAT32, I'm wondering if you know of another format we can use.  With 2012 R2 going over 4 GB, it is not working.


Can anyone answer this with authority?  And does this answer vary depending on the OA firmware level and Generations of the enclosure and/or blades installed?


Forgot to state:  They are using the OA USB connection to load OS images onto BOOT FROM SAN vdisks being served up from an EVA P6550.




Reply from Chad:




You can use EXT2 or EXT3 though I haven’t had success with EXT2 and anything larger than 4 GB (even though it should go up to 16GB) with the OA


Do to this on a Windows laptop, use EaseUS Partition Master Home Edition and Ext2FSD driver from Sourceforge then you can drag and drop within Windows.




Input from Dan:




The OA only supports EXT2 or EXT3 for larger file sizes.




Comments or questions?


The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.