Re: HP SPP does not detect correct Windows drivers (199 Views)
Reply
Occasional Visitor
whopie2002
Posts: 1
Registered: ‎12-11-2013
Message 1 of 2 (204 Views)

HP SPP does not detect correct Windows drivers

I am booting from the SPP 2013.09.0(B) ISO to update firmware on a BL460c G7 running Windows Server 2008 R2. When I run through the wizard, it detects the server 'type' as Linux and not Windows. When it continues, it lists the Linux drivers to install, rather than the ones required for this Windows server. Is this a known issue, or am I missing something ?
Acclaimed Contributor
Torsten.
Posts: 23,449
Registered: ‎10-02-2001
Message 2 of 2 (199 Views)

Re: HP SPP does not detect correct Windows drivers

If you boot the SPP, it runs linux from the CD.

The screen will list FIRMWARE to update, if you see linux DRIVERS, ignore them.

To update drivers, start HPSUM from running windows!

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.