Re: Firmware Upgrade Question for "HP 1Gb Ethernet Pass-Thru Module for c-Class" (759 Views)
Reply
Occasional Visitor
millhouselives
Posts: 2
Registered: ‎01-24-2012
Message 1 of 8 (2,124 Views)

Firmware Upgrade Question for "HP 1Gb Ethernet Pass-Thru Module for c-Class"

Hello,

 

Newbie here to HP Blade environment. Our current firmware level is 2.83, there is version 3.03 available. I figured out process on how to upgrade but I have one question (maybe a stupid one) but just wanted to check with others.

 

Would we be wise to schedule a maintenance window in the early morning hours before users come to work..or....can we do these updates on the fly during the regular workday?

 

thank you

Respected Contributor
Psychonaut
Posts: 214
Registered: ‎08-31-2011
Message 2 of 8 (2,121 Views)

Re: Firmware Upgrade Question for "HP 1Gb Ethernet Pass-Thru Module for c-Class"

I'd schedule an outage window - just in case.
Occasional Visitor
millhouselives
Posts: 2
Registered: ‎01-24-2012
Message 3 of 8 (2,119 Views)

Re: Firmware Upgrade Question for "HP 1Gb Ethernet Pass-Thru Module for c-Class"

thank you for your reply, yup better safe then sorry. just hate those early mornings
Acclaimed Contributor
Torsten.
Posts: 23,450
Registered: ‎10-02-2001
Message 4 of 8 (2,109 Views)

Re: Firmware Upgrade Question for "HP 1Gb Ethernet Pass-Thru Module for c-Class"

I really don't know what the firmware does in this module, but the update process ask you the following:

OA> update device icbay 1a

Entering anything other than 'YES' will result in the command not executing.

Component upgrade may be disruptive to system operation...
Are you sure you want to continue?
yes

Upgrading... DO NOT remove or power cycle device(s)!
This process may take a while.

...


So the early morning is likely a good time for doing this.
It takes only a couple of minutes for all modules.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Visitor
JRE000
Posts: 2
Registered: ‎02-21-2014
Message 5 of 8 (766 Views)

Re: Firmware Upgrade Question for "HP 1Gb Ethernet Pass-Thru Module for c-Class"

Our C3000 Onboard Administrator, under "Enclosure Information", shows that for device module "HP 1Gb Ethernet Pass-Thru Module for c-Class" our current firmware version is 2.8.3 and the available version is 3.0.3.  However, I have been searching the HP support site for the download, and I cannot find it.  Can someone direct me on how to find the 1GB Ethernet pass-thru module firmware and upgrade instructions?

 

Many Thanks!

Acclaimed Contributor
Torsten.
Posts: 23,450
Registered: ‎10-02-2001
Message 6 of 8 (764 Views)

Re: Firmware Upgrade Question for "HP 1Gb Ethernet Pass-Thru Module for c-Class"

It's included, see my post above.


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Visitor
JRE000
Posts: 2
Registered: ‎02-21-2014
Message 7 of 8 (762 Views)

Re: Firmware Upgrade Question for "HP 1Gb Ethernet Pass-Thru Module for c-Class"

Are you referring to this: "update device icbay 1a" ? I am looking for the source and the instructions. Can you clarify?
Acclaimed Contributor
Torsten.
Posts: 23,450
Registered: ‎10-02-2001
Message 8 of 8 (759 Views)

Re: Firmware Upgrade Question for "HP 1Gb Ethernet Pass-Thru Module for c-Class"

google "c01300132".

 

Same for your module.

 

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=2510373&spf...

 


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.