Re: Error 404 after the installation of SPP for Proliant MicroServer Gen8 (826 Views)
Reply
Occasional Contributor
VolkerD_MA
Posts: 4
Registered: ‎02-21-2014
Message 1 of 12 (857 Views)

Error 404 after the installation of SPP for Proliant MicroServer Gen8

[ Edited ]

Hi,

 

after the download of the SPP for Proliant Server (i want to use it with Windows Server 2012 R2), i mount the SPP and copy the files to a bootable USB-Stick.

 

After the start of the server i press the F10 button to start "Intelligent Provisioning". The program starts and began automatically with the update. It shows a white screen with a message "Transfer data from 12.0.0.1" and "Waiting for 127.0.0.1" at the bottom of the screen for several hours.

 

After that the display change to "404 Not found" at the top of the screen and without any chance to do something except the restart of the server.

 

How can I see that the update was successful or an error appears?

 

Thanks

Occasional Visitor
CharlesT
Posts: 1
Registered: ‎03-02-2014
Message 2 of 12 (826 Views)

Re: Error 404 after the installation of SPP for Proliant MicroServer Gen8

I am having the same issue. Were you able to resolve it?

Frequent Advisor
Mike Texter
Posts: 65
Registered: ‎02-22-2011
Message 3 of 12 (711 Views)

Re: Error 404 after the installation of SPP for Proliant MicroServer Gen8

same issue here! Booting the DVD on a DL380G5

Acclaimed Contributor
Torsten.
Posts: 23,450
Registered: ‎10-02-2001
Message 4 of 12 (701 Views)

Re: Error 404 after the installation of SPP for Proliant MicroServer Gen8

Did you use the intelligent provisioning ISO for that?

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Frequent Advisor
Mike Texter
Posts: 65
Registered: ‎02-22-2011
Message 5 of 12 (700 Views)

Re: Error 404 after the installation of SPP for Proliant MicroServer Gen8

Torsten, can you explain what exactly that is?  All i know is i searched for and found the latest HP SPP .ISO i could find, which was from February of 2014, i had been using the September 2013 one before and it worked flawlessly.

Acclaimed Contributor
Torsten.
Posts: 23,450
Registered: ‎10-02-2001
Message 6 of 12 (693 Views)

Re: Error 404 after the installation of SPP for Proliant MicroServer Gen8

Not 100% sure what you did,

but here is the ISO for IP:

 

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5177958&sp...

 

 


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Frequent Advisor
Mike Texter
Posts: 65
Registered: ‎02-22-2011
Message 7 of 12 (690 Views)

Re: Error 404 after the installation of SPP for Proliant MicroServer Gen8

So is there a different .iso for an IP boot versus a direct boot from DVD?  All i did was burn one given .iso (not sure which, or if there are in fact different ones) to DVD and tried to boot to it, then exhibited the error described above.

Acclaimed Contributor
Torsten.
Posts: 23,450
Registered: ‎10-02-2001
Message 8 of 12 (687 Views)

Re: Error 404 after the installation of SPP for Proliant MicroServer Gen8

What exactly is the goal?
Updating firmware?

Then boot the SPP 2014.02 (B) ISO (no need to start intelligent provisionig for that).

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Frequent Advisor
Mike Texter
Posts: 65
Registered: ‎02-22-2011
Message 9 of 12 (679 Views)

Re: Error 404 after the installation of SPP for Proliant MicroServer Gen8

Yeah that's all, updating hard drive firmware.  That's what i'm saying though, booting to that .iso burned to a DVD is exhibitnig the error above.  What's the best way to boot a .iso on an HP box other than a DVD?

Frequent Advisor
Mike Texter
Posts: 65
Registered: ‎02-22-2011
Message 10 of 12 (678 Views)

Re: Error 404 after the installation of SPP for Proliant MicroServer Gen8

Oh my bad!  I guess that's why it's bad form to hijack threads.  i didn't fully realize what the first questioner was having trouble with.  Next time i'll start my own!

Acclaimed Contributor
Torsten.
Posts: 23,450
Registered: ‎10-02-2001
Message 11 of 12 (675 Views)

Re: Error 404 after the installation of SPP for Proliant MicroServer Gen8

Exactly. ;-)

Get the SPP 2014.02 (B) from here:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=spp_2014.02.0B

extract the ISO and you will find the USB create utility. Use this utility to create an USB thumb drive from ISO and boot from it. Select interactive update, agree EULA, select firmware update, review the components and deploy.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Frequent Advisor
Mike Texter
Posts: 65
Registered: ‎02-22-2011
Message 12 of 12 (668 Views)

Re: Error 404 after the installation of SPP for Proliant MicroServer Gen8

Will give it a try and report back, i believe a co-worker of mine was having the same issue with the USB version on the same system model, a separate DL380G5, but for the sake of science, it's my turn to give it a go.  Thanks!

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.