11-22-2012 02:10 AM
Hi all, I have a problem in a c7000 blade chassis HP.
The configuration of the interface modules is:
Bay1-HP VC-Enet Module 1/10Gb
Bay2 - HP VC-Enet Module 1/10Gb
Bay3 - Brocade 4/12 SAN Switch for HP c
Bay4 - Brocade 4/12 SAN Switch for HP c
OnBoard Version: Firmware Version: 3.70
When I connect a blade of this type:
Model: ProLiant BL460c G6
Part Number: 507780-B21
Model: QLogic iSCSI adapter QMH4062
Part Number: 488074-B21
Product View: 0A
When the QLogic FC card is plugged in Position 1, I get this error:
I / O mismatch detected. Plesase see port mapping information
thank you very much
Solved! Go to Solution.
11-22-2012 05:03 AM - edited 11-22-2012 05:14 AM
It looks that You are trying to connect a ethernet mezzanine card to a fibre channel VC module.
QMH4062 is a ethernet mezzanine card.