Re: HP Blade System C7000 Enclosure - Alerts Mail from onboard admin (3104 Views)
Reply
Occasional Advisor
Hayate
Posts: 8
Registered: ‎11-27-2012
Message 1 of 4 (3,120 Views)
Accepted Solution

HP Blade System C7000 Enclosure - Alerts Mail from onboard admin

Hi everyone,

 

i'm searching on the hp website for a while now, trying to find the event description manual for the  alerts mail from the c7000 enclosure onboard admin, but without luck.

 

can you please link me the document?

HP Pro
Renjiv
Posts: 118
Registered: ‎01-02-2012
Message 2 of 4 (3,104 Views)

Re: HP Blade System C7000 Enclosure - Alerts Mail from onboard admin

Hi,

 

You may configure the alert mail from C7000 enclosure Onboard administrator from Enclosure settings > Alert E-mail option.

 

1. Select the Enable AlertMail checkbox to enable the AlertMail feature.

2. Enter values for the e-mail address, alert sender domain, and SMTP server.

3. Click Apply to save settings.

 

AlertMail, if enabled, sends alerts by e-mail for the following events:

 

Enclosure status change

Enclosure information change

Fan status change

Fan inserted

Fan removed

Power supply status

Power supply inserted

Power supply removed

Power supply overload

Blade inserted

Blade removed

Blade status

Blade thermal condition

Blade fault

Blade information change

Tray status change

Tray reset

Switch connect

Switch disconnect

 

For more info refer the below manual pagenumber 71-72:

 

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00705292/c00705292.pdf

 

I hope the info will help you, if so click on the Kudo Star.

 

Regards,

 

Renji V

 

I am an HP employee.

Was this post useful? - You may click the KUDOS! Like to say thank you.
Occasional Advisor
Hayate
Posts: 8
Registered: ‎11-27-2012
Message 3 of 4 (3,097 Views)

Re: HP Blade System C7000 Enclosure - Alerts Mail from onboard admin

thx a lot, i don't know how did i miss it. 

Occasional Visitor
Wrentham636
Posts: 1
Registered: ‎05-06-2014
Message 4 of 4 (1,209 Views)

Re: HP Blade System C7000 Enclosure - Alerts Mail from onboard admin

Thank You for this information, very good!

I took a look through the ilo scripting tools examples but didn't see this. Is there any way to script the enabling of alertmail on all of our enclosures and rack mounted servers?

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.