which rp4440 card slot is which hardware address. (483 Views)
Reply
Trusted Contributor
Steve Post
Posts: 1,058
Registered: ‎09-13-1998
Message 1 of 4 (483 Views)
Accepted Solution

which rp4440 card slot is which hardware address.

I have the manual for the rp4440. I have lots of information about the rp4440. What I don't have is the nice diagram like the one I see on the back of a k570. The picture that would relate a card location to its hardware address.

Is there a picture or map of the devices as seen from the back of the rp4440?

I would like to know the hardware address of the second slot from the right. And the third one from the right. And the first one on the left. Ok. I admit it. I want to know the addresses of all the slots.
Acclaimed Contributor
Torsten.
Posts: 23,266
Registered: ‎10-02-2001
Message 2 of 4 (483 Views)

Re: which rp4440 card slot is which hardware address.

Depending on the hp-ux version you can run

# olrad -q
or
# rad -q

to get a table with the h/w-path vs. slot information (olar - able slots).

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Acclaimed Contributor
Torsten.
Posts: 23,266
Registered: ‎10-02-2001
Message 3 of 4 (483 Views)

Re: which rp4440 card slot is which hardware address.

see also Table 6-5 PCI I/O Paths and
Table 6-6 PCI I/O Hardware Paths :

http://docs.hp.com/en/A9950-96011/ch06s14.html

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Trusted Contributor
Steve Post
Posts: 1,058
Registered: ‎09-13-1998
Message 4 of 4 (483 Views)

Re: which rp4440 card slot is which hardware address.

Thanks.
That looks like a pretty dangerous command. It gave me what I wanted though.
olrad -q for a list of all slots

Slot Path
3 0/4/1
4 0/4/2
5 0/5/1
6 0/5/2
7 0/2/1
8 0/6/1

olrad -h 6
0/5/2/0/4/0
0/5/2/0/4/1
0/5/2/0/6/0
0/5/2/0/6/1


The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.