09-17-2013 05:45 AM
Hey folks, quite new to hp servers and hp-ux and i have been assigned to maintain very old systems.
of which one of the server HP RP 5470 which has the attention light blinking constantly..
Can you please assist me in finding out , the manuals of the product or diagnose what is wrong it..
09-17-2013 06:03 AM
Select Chassis Code Buffer to be displayed:
Incoming, Activity, Error, Current boot or Last boot? (I/A/E/C/L) e
The LED will turn off.
Anything in the logs?
Get the status of fans and PSUs:
Hope this helps!
There are only 10 types of people in the world -
those who understand binary, and those who don't.
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
09-21-2013 01:55 AM
> But how do i get into GSP mode.
If you are accessing the local serial console, just press Control-B. It will not reboot the server: it will only temporarily disconnect the console from HP-UX and allow you to access the GSP. You can switch back to HP-UX by entering the CO (console) command to the GSP prompt.
If the GSP is configured for remote access (= the yellow "Remote" LED in the front panel is lit), then you may also be able to access the console+GSP through a remote modem connection or through a dedicated GSP network interface. The remote modem connection simply provides a terminal interface; the dedicated GSP network interface will allow at least telnet access. Depending on the hardware version of the GSP card, it may or may not have HTTP capability too.
Once you've established a connection and logged in to the GSP, you will be in the console mode by default; press Control-B to switch to the GSP prompt, just like on the local serial console. To disconnect the GSP connection, switch to the GSP prompt and use the DI (disconnect) command. For some reason, the disconnect command will first ask "Are you sure?" and then "disconnect *this* connection?", requiring you to answer "y" twice to disconnect.
(I guess if you had multiple active connections to the GSP, you could answer "n" to the second question to disconnect the *other* active GSP connections.)