Re: Root password expired - console locked by GSP (537 Views)
Reply
Occasional Contributor
AttilaDan
Posts: 8
Registered: ‎09-30-2011
Message 1 of 4 (552 Views)
Accepted Solution

Root password expired - console locked by GSP

I've got an old L-class running HP-UX 11.0.

 

The root password has expired and can only be changed at the console.  However, the console is locked and the GSP needs to be reset to unlock it.  I can run the reset command from another terminal (stty +resetGSP < /dev/GSPdiag1), but it needs to be run as root.  I can't login as root because the password has expired.

 

So I'm in hard place.  I need to change the password at the console, but first I have to reset it.  I can't reset it until I can change the password.

 

I'm sure that a hard boot would get me in, but I'd rather not do that if needed.

 

Any ideas how to get past this?

Honored Contributor
Robert_Jewell
Posts: 1,238
Registered: ‎06-26-2001
Message 2 of 4 (549 Views)

Re: Root password expired - console locked by GSP

To perform a hard reset of the GSP, access the side panel of the L Class server and look for the GSP Rest button on the side of the GSP card (second card slot from the bottom).

 

Performing this will not affect the server or OS.

 

-Bob

Occasional Contributor
AttilaDan
Posts: 8
Registered: ‎09-30-2011
Message 3 of 4 (537 Views)

Re: Root password expired - console locked by GSP

Thanks for the quick reply Bob. Unfortunately this is in a rack mount and the side panel is not accessable without a power-down.
Occasional Contributor
AttilaDan
Posts: 8
Registered: ‎09-30-2011
Message 4 of 4 (463 Views)

Re: Root password expired - console locked by GSP

I figured out a way to gingerly open the rack and reset the GSP.  Thanks for the help Bob!

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.