Move from 700/96 Terminal to Thin Client (260 Views)
Occasional Visitor
Posts: 1
Registered: ‎10-30-2013
Message 1 of 2 (260 Views)

Move from 700/96 Terminal to Thin Client

Hi, I have an rp3410.


It was previously connected to an 700/96 Terminal via cable 24542G, but I would like to be able to connect this to our t5000 series thin client and use that in future.


Could anyone advise if it is 'simply' a case of connecting this cable to the thin clients parallel port and then configuring the terminal emulator; or would I need a completely different cable that would connect into its serial port?


Many thanks



Acclaimed Contributor
Posts: 23,920
Registered: ‎10-02-2001
Message 2 of 2 (245 Views)

Re: Move from 700/96 Terminal to Thin Client

I think you currently have 25 pin to 9 pin, but you probably need 9 pin to 9 pin.


This cable would be nothing special, just null modem.

Hope this helps!


There are only 10 types of people in the world -
those who understand binary, and those who don't.


No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.