HP9000 RP8400 BOOT_ON_FAILURE_GOT_BCH (409 Views)
Reply
Occasional Advisor
DR70
Posts: 13
Registered: ‎03-06-2013
Message 1 of 4 (409 Views)
Accepted Solution

HP9000 RP8400 BOOT_ON_FAILURE_GOT_BCH

[ Edited ]

Hi All.

 

I've a problem to boot a HP9000 RP8400.

 

It seems that the boot cell is not available due to power supply problem.

 

Could you please confirm me that?

Furthermore, how can i fix the problem that is affecting the system?

 

MP:VWR (<CR>,<sp>,+,-,D,F,L,J,V,H,^B) >
# Location Alert Keyword Timestamp
570 PDC 0,2,0 *3 0x58008830a4002002 0x00007104090b250b BOOT_ON_FAILURE_GOTO_BCH
569 PDC 0,2,0 *2 0xb8008420a4002004 0xfffffffffffffffa BOOT_SELECTED_PATH_FAILED
569 PDC 0,2,0 *2 0x58008c0000002000 0x00007104090b250b 05/09/2013 11:37:11
568 PDC 0,2,0 *2 0xb8008320a4002004 0xfffffffffffffffa BOOT_SELECTED_PATH_FAILED
568 PDC 0,2,0 *2 0x58008b0000002000 0x00007104090b250b 05/09/2013 11:37:11
567 PDC 0,2,0 *2 0xb8008220a4002004 0xfffffffffffffffa BOOT_SELECTED_PATH_FAILED
567 PDC 0,2,0 *2 0x58008a0000002000 0x00007104090b250b 05/09/2013 11:37:11
566 PDC 0,2,0 *10 0x200086a0a2002059 0x00ffff02ffffff94 BOOT_NOT_ALL_GROUP_A_CELLS_PRESENT
566 PDC 0,2,0 *10 0x58008e0000002050 0x00007104090b2437 05/09/2013 11:36:55
565 PDC 0,2,0 *10 0x180085a0a200c013 0x0000000000000004 BOOT_PD_RENDEZ_TIMEOUT
565 PDC 0,2,0 *10 0x58008d000000c010 0x00007104090b242f 05/09/2013 11:36:47
564 CLMP 0 *2 0x202005228d01303f 0x000001ffffffff8d PCIBP_PWR_OFF
564 CLMP 0 *2 0x58200d0000003030 0x00007104090b1c25 05/09/2013 11:28:37
563 HPUX 0,1,0 *13 0x78e046d41100f000 0x0000000300000000
563 HPUX 0,1,0 *13 0x58e04e000000f000 0x000071031e0c3001 04/30/2013 12:48:01
562 PDHC 0,1 *2 0x246012229201303f 0x00ffff01ff00ff91 POWER_OFF
562 PDHC 0,1 *2 0x58601a0000003030 0x000071031e0c140f 04/30/2013 12:20:15
561 PDHC 0,1 *14 0x246011e39201404f 0x00ffff01ff00ff91 POWER_FAULT
561 PDHC 0,1 *14 0x5860190000004040 0x000071031e0c140e 04/30/2013 12:20:14
560 CLMP 0 *2 0x202004229201303f 0x00ffffffff01ff64 CELL_PWR_OFF
560 CLMP 0 *2 0x58200c0000003030 0x000071031e0c140d 04/30/2013 12:20:13

 

Best Regards,

 

Daniele

Please use plain text.
HP Pro
Holger G
Posts: 51
Registered: ‎11-16-2010
Message 2 of 4 (381 Views)

Re: HP9000 RP8400 BOOT_ON_FAILURE_GOT_BCH

[ Edited ]

Hi Daniele,

 

the partition 1 (OVOMGR2), which contains cell boards 1 and 2, does not boot because cell 1 failed with a "CPU 2.0V Rail VOLTAGE FAULT" and is powered off now, and all boot pathes are on IO locations attached to cell 1 (1/x/x/x/x.x).

 

The "CPU 2.0V Rail VOLTAGE FAULT" is a DC/DC (VRM) voltage issue on cell 1. That voltage rail is supported by VRMs 5-9 (VRM 4 is not used on rp8400). So you may need to exchange all those VRMs.

Note: There are 8 low voltage VRMs (0-3,5-9) on the cell. As you should not mix different VRM vendors and part numbers, you may need to order 8 new VRMs and check what you get.

 

 

Kind Regards

Holger

I am an HP employee.
Was this post useful? - You may click the KUDOS! Star.

Please use plain text.
Occasional Advisor
DR70
Posts: 13
Registered: ‎03-06-2013
Message 3 of 4 (377 Views)

Re: HP9000 RP8400 BOOT_ON_FAILURE_GOT_BCH

[ Edited ]

Hello Holger. 

 

Many thanks for your explanation. I've one last question, do you know if HP is still selling spare parts for the customer machine?

Please use plain text.
HP Pro
Holger G
Posts: 51
Registered: ‎11-16-2010
Message 4 of 4 (373 Views)

Re: HP9000 RP8400 BOOT_ON_FAILURE_GOT_BCH

Hi Daniele,

 

those VRM parts are still available.
If you have no HW contract for this system, I would suggest that you contact HP support or your HP support partner to get those parts.

 

 

Kind Regards

Holger

I am an HP employee.
Was this post useful? - You may click the KUDOS! Star.

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation