Configure Windows Server 2012 MPIO with 3PAR (4320 Views)
Reply
Super Advisor
JuanCG
Posts: 257
Registered: ‎08-03-2008
Message 1 of 5 (4,320 Views)

Configure Windows Server 2012 MPIO with 3PAR

[ Edited ]

Hi all, I have an HP 3PAR with Inform version 3.1.1, I wish disks about Windows Server 2012, but not how to set the MPIO.

Do you know how to do this?

regards

 
 
 
P.S.This thread has been moved from HP StoreVirtual / HP LeftHand Storage to Storage Area Networks (SAN) (Enterprise)- HP Forums Moderator
Honored Contributor
oikjn
Posts: 770
Registered: ‎07-20-2011
Message 2 of 5 (4,305 Views)

Re: Configure Windows Server 2012 MPIO with 3PAR

I think you are in the wrong forum for that.

Frequent Advisor
StuartA46
Posts: 45
Registered: ‎10-06-2011
Message 3 of 5 (4,263 Views)

Re: Configure Windows Server 2012 MPIO with 3PAR

I know how to do it for W2K8.  would that help?

 

  Stuart A.

Honored Contributor
Sheldon Smith
Posts: 903
Registered: ‎07-27-2003
Message 4 of 5 (4,250 Views)

Re: Configure Windows Server 2012 MPIO with 3PAR

Documented in the HP 3PAR Windows Server 2008 and Windows Server 2012 Implementation Guide. Basically the same as for Windows 2008.
Note Chapter 6 about allocating storage, especially quick formatting TPVVs under 2012. You really really need to use the "fsutil" commands before and after as documented.

Honored Contributor
Bart_Heungens
Posts: 687
Registered: ‎10-26-2005
Message 5 of 5 (4,246 Views)

Re: Configure Windows Server 2012 MPIO with 3PAR

Here is the link to the document

 

http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSer...

 

 

Kr,

Bart

--------------------------------------------------------------------------------
If my post was useful, clik on my KUDOS! "White Star" !
My blog: http://blog.bitcon.be
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.