Re: "Instant Capacity" (iCAP) service fail to start during last boot-up (299 Views)
Reply
Occasional Advisor
Posts: 10
Registered: ‎08-17-2007
Message 1 of 7 (299 Views)

"Instant Capacity" (iCAP) service fail to start during last boot-up

why did "Instant Capacity" (iCAP)service fail to start during last boot-up?
Exalted Contributor
Posts: 33,806
Registered: ‎08-15-2002
Message 2 of 7 (299 Views)

Re: "Instant Capacity" (iCAP) service fail to start during last boot-up

Shalom,

Check /etc/rc.log for error inforamtion.

check the startup script in /sbin/init.d

try running the startup script manually and seeing what the response code is.

look at any configuration scripts referred to in the startup script and see that the setting in the file in /etc/rc.config.d are correct.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Honored Contributor
Posts: 959
Registered: ‎12-20-1999
Message 3 of 7 (299 Views)

Re: "Instant Capacity" (iCAP) service fail to start during last boot-up

are you using icap? if not, disable it, and be done with it.
Honored Contributor
Posts: 1,836
Registered: ‎09-26-2000
Message 4 of 7 (299 Views)

Re: "Instant Capacity" (iCAP) service fail to start during last boot-up

Yes, you can disable it in the start file under /sbin.
"Well, actually, she is a rocket scientist" -- Steve Martin in "Roxanne"
Occasional Advisor
Posts: 10
Registered: ‎08-17-2007
Message 5 of 7 (299 Views)

Re: "Instant Capacity" (iCAP) service fail to start during last boot-up

No I am not using iCAP. Could you please send me step by step procedure to permanently disable the iCAP? Some where I find that if I disable it, next time when I restart the server again its enable.
Honored Contributor
Posts: 1,501
Registered: ‎11-22-1999
Message 6 of 7 (299 Views)

Re: "Instant Capacity" (iCAP) service fail to start during last boot-up

Hi Zubair,

You can remove the ICOD but you can try this workaround to prevent it from starting

# cd /sbin/rc2.d
# mv S602icod XXXicod
# cd /sbin/rc1.d
# mv K398icod XXX icod

When the next system boot up, it will not start the icod

hope this help
WK
please assign points
Problem never ends, you must know how to fix it
Honored Contributor
Posts: 1,501
Registered: ‎11-22-1999
Message 7 of 7 (299 Views)

Re: "Instant Capacity" (iCAP) service fail to start during last boot-up

Hi Zubair,

You can remove the ICOD but you can try this workaround to prevent it from starting

# cd /sbin/rc2.d
# mv S602icod XXXicod
# cd /sbin/rc1.d
# mv K398icod XXXicod

When the next system boot up, it will not start the icod

hope this help
WK
please assign points
Problem never ends, you must know how to fix it
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.