12-08-2013 10:11 AM
I had a bad battery light on my UPS so I replaced the batteries and now all I seem to get is the Utility light that flashes green with an occasional red and an occasional 3 red in a row. I let it go for 18 hours and still am getting the same. If I push on any button on the front it just makes like the alarm sound when held. Took the new batteries back to where I bought them to test and the tray is putting out the specs that it should. Cannot even power up any of my servers. When I unplug from the wall and plug it back in it runs power to my servers briefly then stops. When the battery tray is not present then it will keep power cycling on the servers every 30-60 seconds along with the still flashing Utility light. As soon as I slide the tray back in it stops power cycling the servers on and does nothing.
Any ideas please?
01-16-2014 12:34 PM
I hade the same issue after replacing the batteries in r3000xr. I think I solve it by reseting ups somehow, unfortunatelly I do not remember it exactly. Check this manual - http://www.manualslib.com/manual/376795/Hewlett-Pa
01-16-2014 12:46 PM
Here is user manual directly at HP: