R3000 XR UPS with Management Card (948 Views)
Reply
Occasional Visitor
Roland_s
Posts: 3
Registered: ‎12-09-2010
Message 1 of 6 (948 Views)
Accepted Solution

R3000 XR UPS with Management Card

At this moment i have a customer that has a multiple R3000 XR UPS with Management Card, i don't know what kind of management card, it has one serial and one network connection.

Does anyone know where i can found software/agents for Windows Servers? I use HyperV at Windows 2008 R2.

Thanks in advance,
Roland
Please use plain text.
Honored Contributor
Zygmunt Krawczyk
Posts: 825
Registered: ‎09-05-2003
Message 2 of 6 (948 Views)

Re: R3000 XR UPS with Management Card

Please use plain text.
Honored Contributor
Michal Kapalka (mikap)
Posts: 2,683
Registered: ‎08-19-2007
Message 3 of 6 (948 Views)

Re: R3000 XR UPS with Management Card

Please use plain text.
Occasional Visitor
Roland_s
Posts: 3
Registered: ‎12-09-2010
Message 4 of 6 (948 Views)

Re: R3000 XR UPS with Management Card

Thanks!

I was looking for management software, just like you need with APC, but this look likes what i need.

Thanks again,
Roland
Please use plain text.
Occasional Visitor
Roland_s
Posts: 3
Registered: ‎12-09-2010
Message 5 of 6 (948 Views)

Re: R3000 XR UPS with Management Card

The steps suggest in using a web interface to add devices through a web interface. But this is going to be a problem, because the ups management modules are both configured with an ip address, trough serial port, but i don't have a web interface or the possibility to enable the web interface.

When i connect to the Management Module trough serial port, i see this PowerWare Connect UPS-EM 3.60 And i can only change some basic things, like change ip, SNMP, etc

So, what do i need? Is this just an old UPS MM card and do i need a new one, or do i need to use other software?

I also did try the HP Power Manager, but then i only can manage 1 UPS.

Any suggestions?

Thanks again,
Roland
Please use plain text.
Trusted Contributor
Brian Vo
Posts: 96
Registered: ‎09-19-2006
Message 6 of 6 (948 Views)

Re: R3000 XR UPS with Management Card

I think you have a "SNMP/Serial card". This card requires to use with HP Power Manager (HPPM) (v4.3.2 is the latest version) to manage a UPS and its Remote Agent to shutdown your protected server. Window Agent v4.0.11 is the latest version. So try it with Window HyperV.

This product is now replaced by HP Management Module (HPMM). Its FW includes UPS Management so all you need is to install Power Portection Agent to shutdown your protected server.

Brian
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation