HP UPS Management Module upgrade firmware from 1.0.20 to 2.1.3 (483 Views)
Reply
Occasional Visitor
tomozava
Posts: 1
Registered: ‎09-01-2010
Message 1 of 2 (483 Views)

HP UPS Management Module upgrade firmware from 1.0.20 to 2.1.3

I want to upgrade firmware on UPS Management Module from v 1.0.20 to latest 2.1.3.
in read me is

Require to have HP FLash Utility v2.0.5 to upgrade FW from 1.x to 2.x

Can you help me where can download older version HP FLash Utility v2.0.5 and also older firmware because for firmware 2.1.3 need HP Flash Utility 3.0.3

thx for any help
Trusted Contributor
Brian Vo
Posts: 96
Registered: ‎09-19-2006
Message 2 of 2 (483 Views)

Re: HP UPS Management Module upgrade firmware from 1.0.20 to 2.1.3

You can use the HP Flash Utility 3.0.3 or the latest. Once done make sure to go back to serial configuration (Hyperterminal) to set it "Factory Default" before manually restore all your settings again.

Brian
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.