04-05-2013 02:47 AM - last edited on 04-06-2013 05:56 PM by Cathy_xu
I am having trouble registering the Hosting Device on a new installation of HP Insight Remote Support.
The version is 7.0.5.0193.
The initial connection test is succesful but as soon as I click Register with HP, it takes about 10 minutes then says Unable to Register with HP.
Can anyone point me to some log files to check or where I should start troubleshooting?
Connectivity tests are succesful, firwall configuration is not blocking any traffic, it just wont register.
Moved from TRC HP Systems Insight Manager Forum to Insight Remote Support > General
04-05-2013 03:19 AM
Do you have outgoing filtering? Take care the registration uses a webservice which is using data compression for large XML data transport. I already saw content filters which removed the compressed information by default.
04-05-2013 07:23 AM
In this case I can only guess that you have 7.05 build less than 193?
Or some of the parameters you entered have conflict on the HP side.
Did you know that you have free support from HP if your HW which you plan to monitor still has warranty or a mantainance contract. You can open a HW Call mentioning it concerns Insight Remote Support.
04-08-2013 01:49 PM
Right, you may ultimately need to file a support ticket to get focus on your specific issue since there is troubleshooting data that you don't want to post in a public forum.
In the meantime, there are a couple things you can look at that might help identify what is happening. If you look in the C:\ProgramData\HP\RS\Data\INTEGRATION\adapters\HpA
- UCARegistrationRequest_MsgId[xxx].xml is the data being sent to HP to complete the registration request.
- UCARegistrationResult_MsgId[xxx].xml is the HP-provided response to that request.
The result may give some actionable indication of what failure was encounter (e.g. if there was a connectivity problem, or a temporary HP issue), although, to be fair, there is an equal chance that the error response won't mean a whole lot to you. It's worth a look though.
Make sure that you are on a supported OS (and the the SPP is installed if running on a host OS). If running in a guest OS, make sure you are on a supported hypervisor version.
06-02-2013 12:07 PM
I am having the same problem with HP insight online.
registration status is ok, but impossible to make Inisgth online and register device
isee:ISEE-Registration schemaVersion="5.00" xmlns:isee="http://www.hp.com/schemas/isee/5.00/event" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
we have opened a case since weeks
CASE:4644958357 (with IRS level 3)
could you please provide some help ?
08-08-2013 01:35 AM
HP pentrate us to install this pile of sh* on software and they are not able to provide a version which is capable to run on Hyper-V.
we tried now version 7.0.8 on a Hyper-V guest with exactly the same problem...not able to register with HP.
Good job HP !
10-28-2013 04:41 PM
The valdiation wizard passes everything before install and then registration fails? How lame is the validation wizard?
This remote support was a major selling point before we pruchased, at no time was it mentioned that HP don't support Microsoft Hyper-V which is all we run on all our HP servers.
HP could not be more lame and deceptive about how this rubbish software is supposed to work. So much for being a Microsoft parner, means nothing in reality.
So many people in the forums have to same problem and HP treat us with complete contempt by not doing anythign to fix it.