HP IP Console No Keyboard.. (288 Views)
Reply
Occasional Contributor
Tularis
Posts: 4
Registered: ‎05-09-2013
Message 1 of 3 (288 Views)

HP IP Console No Keyboard..

[ Edited ]

Hello,

 

I have a "HP IP and Server Console Switch G2 (With Virtual Media) Connected to a HP DL380p."

 

The keybord works in the Device its self, to configure IP address etc.. but when you connect to the server the keybord is not being attached....

 

It works if I connect the keybord directly to the server... even when I connect via the http KVM no keybord commands are passed to the server :( ....

 

 

P.S. This thread has been moved from ProLiant Servers (ML,DL,SL) to Servers > general - Hp forum Moderator

Honored Contributor
Jimmy Vance
Posts: 1,572
Registered: ‎11-27-2006
Message 2 of 3 (277 Views)

Re: HP IP Console No Keyboard..

Are you sure the dongle from the server to the KVM is connected properly?

Occasional Contributor
Tularis
Posts: 4
Registered: ‎05-09-2013
Message 3 of 3 (267 Views)

Re: HP IP Console No Keyboard..

Yup,

 

I have Both LEDs on the Dongle

 

USB + VGA Connected to server, CAT5 Connected to the Dongle, and CAT5 connected to the IPKVM....

 

What could it be?

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.