Re: BL860c I2 INCONSTATE bugcheck in SYS$KBDDRIVER+15ed0 (162 Views)
Reply
Regular Advisor
Adrian Graham_1
Posts: 121
Registered: ‎09-06-2004
Message 1 of 4 (255 Views)

BL860c I2 INCONSTATE bugcheck in SYS$KBDDRIVER+15ed0

[ Edited ]

Folks,

 

We had the aforementioned blade crash badly earlier today and come straight back up. There's nothing in the event logs other than 'I had a bugcheck' and SDA is telling me the crash was an ACCVIO in SYS$KBDDRIVER with related links to SYS$HIDDRIVER and SYS$HIDDRIVER - all input devices when none are connected as everything is IP based, though I've noticed in OPERATOR.LOG there were login requests just before the crash.

 

No processes are shown running on any of the cores, but is it possible a mangled login attempt took the machine down?

 

Anyone seen this before? The other 7 blades haven't done this (yet) and they're all at the same FW levels and patch levels.

 

Puzzling...

 

Cheers!

 

Adrian

Please use plain text.
Honored Contributor
Volker Halle
Posts: 5,203
Registered: ‎04-26-2004
Message 2 of 4 (240 Views)

Re: BL860c I2 INCONSTATE bugcheck in SYS$KBDDRIVER+15ed0

Adrian, you didn't specify the OpenVMS I64 version and the installed patches, so we need to guess... With a release date of 29-OCT-2012, there is patch VMS84I_USB-V0100, which talks about crash problems in this driver and has the most recent SYS$KBDDRIVER for OpenVMS I64 V8.4 Please check, whether this patch is installed on your systems. Volker.
Please use plain text.
Frequent Advisor
fhsjvl
Posts: 40
Registered: ‎05-18-2011
Message 3 of 4 (188 Views)

Re: BL860c I2 INCONSTATE bugcheck in SYS$KBDDRIVER+15ed0

HP say you need to install two things:

 

- The OpenVMS USB patch kit mentioned by Volker Halle and

- the newest firmware for your system (for the rx2800 i2 system this is bundle 26.35, I do not know what it is for your blade).

Please use plain text.
Regular Advisor
Adrian Graham_1
Posts: 121
Registered: ‎09-06-2004
Message 4 of 4 (162 Views)

Re: BL860c I2 INCONSTATE bugcheck in SYS$KBDDRIVER+15ed0

Hi folks,

 

Apologies for a lack of response, I've not been able to access the community for a few days, turns out my laptop just needed a reboot :)

 

It's 8.4 with all patches up to May last year so we'll get the USB patch installed and see what happens. The blades are already at the latest firmware revision.

 

Cheers!

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation