Re: Aries Emulation issues (193 Views)
Reply
Frequent Advisor
Trojan36
Posts: 137
Registered: ‎03-20-2006
Message 1 of 6 (193 Views)

Aries Emulation issues

Our application is experiencing run time problems when executing within Aries on HP 11.23/Itanium. The application has been built on HP 11.11/PA-RISC. Does anyone know if:

1. Is this configuration (i.e., Build on HP 11.11/PA-RISC and run on HP 11.23/Itanium with Aries) a configuration that is certified by HP?

2. Are there any issues known to HP with using this build/execute configuration?

thx in advance
Acclaimed Contributor
James R. Ferguson
Posts: 21,184
Registered: ‎07-06-2000
Message 2 of 6 (193 Views)

Re: Aries Emulation issues

Hi:

You don't offer an explanation (details) of "run time problems".

The Aries manpages document potential performance limitations and general application requirements:

http://docs.hp.com/en/B3921-60631/ARIES.5.html

Regards!

...JRF...
Honored Contributor
Duncan Edmonstone
Posts: 5,678
Registered: ‎08-05-2000
Message 3 of 6 (193 Views)

Re: Aries Emulation issues

Aries is a pretyy specialist area - you may not find too many on the forums with much specialist knowledge. Nevertheless as James indicated you could start by describing the problesm you are having.

The support statement for Aries is here:

http://h71028.www7.hp.com/ERC/downloads/4AA1-7766ENW.pdf

I'd laso direct you to the main site for Aries information:

http://www.hp.com/go/aries

Note that patches have been releaed in the last month that should be applied. Details on the link above.

HTH

Duncan

HTH

Duncan
Exalted Contributor
Steven E. Protter
Posts: 33,806
Registered: ‎08-15-2002
Message 4 of 6 (193 Views)

Re: Aries Emulation issues

Shalom,

At my prior employer a series of tests were run using their applications under the ARIES emulation.

The performance hit was 70% versus a recompile of the application on Itanium.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Acclaimed Contributor
Dennis Handly
Posts: 25,067
Registered: ‎03-06-2006
Message 5 of 6 (193 Views)

Re: Aries Emulation issues

>Our application is experiencing run time problems

Performance or correctness?
Have you contacted the Response Center yet?

>1. Is this configuration (i.e., Build on 11.11 and run on 11.23/Integrity with Aries) a configuration that is certified by HP?

Naturally, otherwise what good would it be? See Duncan's links for exceptions.
HP Pro
Rajesh K Chaurasia
Posts: 76
Registered: ‎01-31-2008
Message 6 of 6 (193 Views)

Re: Aries Emulation issues

Good day,

PA-RISC HP-UX 11i v1 compiled user space applications would work fine under ARIES emulation on HP-UX 11i v2 and v3 on Integrity servers.

What kind of runtime issues you are facing with ARIES - correctness or performance? As a first step I would recommend latest HP-UX 11i v2 OE and QPK bundles and latest ARIES patches (PHSS_38526 for HP-UX 11.23). For initial triaging I would suggest ARIES troubleshooting page:

http://h21007.www2.hp.com/portal/site/dspp/menuitem.863c3e4cbcdc3f3515b49c108973a801/?ciid=c935c7b31...

Regards
-Rajesh

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.