hp 1020 fax memory and resetting (98 Views)
Reply
Occasional Visitor
keith janetta
Posts: 2
Registered: ‎10-16-2003
Message 1 of 3 (98 Views)
Accepted Solution

hp 1020 fax memory and resetting

My outgoing message will no longer record - the machine locks up. This happened once before and I had to reset the machine by powering it down, turning it on and pressing something like *123 during its boot phase. Does anyone remeber how to do this? I have forgotten how to reset the machine?
Respected Contributor
Jeremy_62
Posts: 277
Registered: ‎09-10-2003
Message 2 of 3 (98 Views)

Re: hp 1020 fax memory and resetting

Keith,
Unplug the power. Plug it back in, and when you see the dots (.......) scrolling across the screen, press and hold the asterisk (*) key. Release it when the display reads "all memory init". After this you will need to power the machine back off and on again, and reset the counrty and language. Hope this helps.
Good Luck
Jeremy
Occasional Visitor
keith janetta
Posts: 2
Registered: ‎10-16-2003
Message 3 of 3 (98 Views)

Re: hp 1020 fax memory and resetting

Thanks - Worked great
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.