Re: Get the temperature of a HP SmartArray P410/250 (329 Views)
Reply
Occasional Advisor
Litch
Posts: 10
Registered: ‎07-18-2012
Message 1 of 2 (336 Views)

Get the temperature of a HP SmartArray P410/250

[ Edited ]

My server self-monitors and logs temperatures etc...

 

Questions:

 

1a. Does the P410 have a temp sensor onboard?

1b. How does one retrieve the temperature?

 

2. How does one probe physical disks of a logical drive for individual temperatures?

 

 

P.S. This thread has been moved from Servers > General to Disk Array - HP Forums Moderator

Please use plain text.
Honored Contributor
Johan Guldmyr
Posts: 3,840
Registered: ‎06-14-2009
Message 2 of 2 (329 Views)

Re: Get the temperature of a HP SmartArray P410/250

[ Edited ]

Hi,

One way to get disk temps is out of the hp diagnostics. Perhaps the controller temperatures are in there too somewhere? I didn't look too closely.

If you run "hpacucli ctrl slot=4 diag file=/tmp/ctrl_slot4.zip"

Then you get a zipfile, inside the zipfile are some files.
If you search for "Temperature" inside the ADUReport.txt file I can see several counters called "Current Temperature" that are non-zero (not 0x00). I presume these indicate the temperature of a disk in hex.

The counters are under this section in the ADUReport

Smart Array P411 in slot 1 : StorageWorks D2600 at Port 1E : Box 1 : Drive Cage on Port 1E : Physical Driv
e (2 TB SAS) 1E:1:2 : Physical Drive Status



Click the Kudos Star if this was a good post.
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation