"INFLATE FAILURE" (745 Views)
Reply
Occasional Visitor
Dave Kemper
Posts: 1
Registered: ‎09-08-2010
Message 1 of 5 (745 Views)

"INFLATE FAILURE"

On boot our 9250c displays "INFLATE FAILURE SEND RFU UPGRADE ON USB DEV PORT"

I uploaded a new flash to resolve with no change. Any ideas what to try next?

Thanks in advance.
Occasional Visitor
mackycr_1
Posts: 1
Registered: ‎05-17-2011
Message 2 of 5 (732 Views)

Re: "INFLATE FAILURE"

Hi Dave,

I have heard this issue before and most of the times the issue gets resolved by replacing the formatter board. This issue has to do with the firwmare of the device. Since the formatter board includes the firmware card embedded this should resolve your issue.

Regards,


Will

Occasional Contributor
Ccsa
Posts: 4
Registered: ‎05-01-2013
Message 3 of 5 (452 Views)

Re: "INFLATE FAILURE"

There are a start up method that consist to push a button during the ram count 128 but. This method is to clearing the Rfu errors but we need the help of HP because this is not a public method.
HP Pro
Askme
Posts: 691
Registered: ‎09-18-2011
Message 4 of 5 (429 Views)

Re: "INFLATE FAILURE"

You might need to contact HP support to obtain solution for this particular issue.

Please mark the post that solves your problem as Accepted Solution
Click the Kudos star if this was helpful. Thank You!

(Although I am an HP employee, I am speaking for myself and not for HP)
Occasional Contributor
Ccsa
Posts: 4
Registered: ‎05-01-2013
Message 5 of 5 (421 Views)

Re: "INFLATE FAILURE"

Please could you explain the method to go into the RFU error menu?

 

There are some menu methods to clear the error before change any card.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.