Lan FAx whit RTE Fax parameters (423 Views)
Reply
Occasional Contributor
Bataller Joaquin
Posts: 4
Registered: ‎11-03-2008
Message 1 of 3 (423 Views)

Lan FAx whit RTE Fax parameters

[ Edited ]

 

hello,

 

what are the parameters to declare on the RTE Fax server for the HP DSS server work.

 

 

 

c00433124.pdf - Adobe Reader.jpg

 

dss.jpg

HP Pro
Soups_on
Posts: 19
Registered: ‎05-06-2013
Message 2 of 3 (398 Views)

Re: Lan FAx whit RTE Fax parameters

Joaquin -

 

Generally you need to do two things - 

1) Configure the fax sever to work with DSS

     - You need to configure a "watched" folder for the RTE fax server to look for jobs coming from DSS

     - There should be a configuration setting in RTE fax to set this up, if not, check their documentation

 

2) Configure the DSS software via the Configuration Utility to enable Lan Fax

     - Select the RTEFAX setting

     - Browse to the "watched" folder setup by RTE fax

     - Select if you want DSS to send the job notification (or let the fax server do it)

     - There are a few other settings in the DSS Cong Util, but keep them as is.

 

Give this a try.

I work for HP. The views expressed in my contributions are my own and do not necessarily reflect the views and strategy of HP.

Say Thanks by clicking the Kudos Star in the post if this helped you.
Please mark the post that solves your problem as Accepted Solution
Occasional Contributor
Bataller Joaquin
Posts: 4
Registered: ‎11-03-2008
Message 3 of 3 (393 Views)

Re: Lan FAx whit RTE Fax parameters

[ Edited ]

Hello and thank you for your help.

Under RTEFax it is specified an entry for faxing folder.

Another folder for confirmation and a last folder for errors.

On DSS4  it is possible to setup a single folder only.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.