Re: HP digital sender 9250c Shows a Error,How can i solve it? (2231 Views)
Reply
Occasional Contributor
uddipon
Posts: 4
Registered: ‎07-14-2012
Message 1 of 4 (2,553 Views)
Accepted Solution

HP digital sender 9250c Shows a Error,How can i solve it?

[ Edited ]

Dear HP Friends

 

This is  from  www.uddipon.com.

Recently one of our client faced a problem about HP9250C.

When he turn on the digital sender device that time shown a error  FF04 ERROR, TURN OFF THEN ON, After 1-2 minuites hide the display icon of HP digital sender.

How can i solved this problem?

What is the main reason for this problem?

Is any problem for Hardware, Software, Virious or Electrical ?

 

Please advice us ASAP.

 

With best regards

 

 

Sumon Rahman

www.uddipon.com

 

Frequent Advisor
Touseef Rahman
Posts: 29
Registered: ‎07-19-2007
Message 2 of 4 (2,393 Views)

Re: HP digital sender 9250c Shows a Error,How can i solve it?

Disconnect your device from the network, perform a hard disk init first.  This procedure clears the hard disk contents, so your address book and digital send settings would be gone.

 

1) Turn off the device and turn it on.

2) When the memory count starts, press and hold the START button on the right hand side.

3) Release the button when the 3 LEDs light up together.

4) Press 5 and then 6.

 

If it still boots up with the error perform a cold reset.

 

1) Turn off the device and turn it on.

2) When the memory count starts, press and hold the 6 key 

3) Release the key when the 3 LEDs light up together.

4) You would see "SELECT LANGUAGE" on the display. Press 9 until you find "COLD RESET"

5) Press 6.

This procedure restores your device to factory defaults. 

Occasional Contributor
uddipon
Posts: 4
Registered: ‎07-14-2012
Message 3 of 4 (2,231 Views)

Re: HP digital sender 9250c Shows a Error,How can i solve it?

Hello Mr. Thanks a lot for your Solution.

I am realy happy now.But dear friend, i have little problem also,Please check the link  Hp 9250c Digital Sender LCD problem .

Dear, I think you help me again.Waiting for your reply.

 

Regards

 

Uddipon

 

Outstanding Contributor
DavidZuts
Posts: 15,494
Registered: ‎02-27-2006
Message 4 of 4 (2,196 Views)

Re: HP digital sender 9250c Shows a Error,How can i solve it?

What does it show when you press the network address button?
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.