DS 9200C - INFLATE FAILURE RESEND RFU OVER NETWORK PORT (6043 Views)
Reply
Occasional Contributor
Posts: 4
Registered: ‎05-01-2013
Message 1 of 2 (6,043 Views)

DS 9200C - INFLATE FAILURE RESEND RFU OVER NETWORK PORT

DS 9200C infinite LOOP BOOT

In the start up
After memory counting 128MB
Appears the message
INFLATE FAILURE RESEND RFU OVER NETWORK PORT
followed by
RFU RECEIVED CYCLING POWER

And after this the machine try another time to boot in an infinite loop

There are a keyboard method to clearing RFU errors. Please could anyone explain this method?

Thanks in advance
HP Pro
Posts: 36
Registered: 2 weeks ago
Message 2 of 2 (12 Views)

Re: DS 9200C - INFLATE FAILURE RESEND RFU OVER NETWORK PORT

Hello Ccsa,

 

Try a Cold Reset first. If not then replace formatter board.

 

To perform a cold reset

 

1. Turn off the digital sender.

2. Turn on the digital sender.

3. Immediately after turning on the device, press and hold down the #6 key (do not wait for the memory-count). When the three status LEDs are illuminated, release the #6 key.

4. Press the #3 key four times until the display shows COLD RESET.

5. Press the #6 key once to initiate the cold reset. The product will continue its boot-up sequence.

If the answer I given you has solved your issue, please feel free to click in the thumbs up +1 as sign of appreciation!

I'm an HP Employee helping in my free time, I speak for myself and not on behalf of HP or any of its related companies.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.