Greetings Card substrate for HP Indigo 7000 (1703 Views)
Reply
Occasional Visitor
tony ralph
Posts: 1
Registered: ‎10-06-2009
Message 1 of 3 (1,703 Views)

Greetings Card substrate for HP Indigo 7000

Hello. I am looking for one sided coated white back board in roughly 360 microns for Greetings Cards that is HP Indigo approved and guaranteed. Can anyone help?

Thanks
Antony
Please use plain text.
Trusted Contributor
ANNIE
Posts: 749
Registered: ‎11-19-2009
Message 2 of 3 (1,595 Views)

Re: Greetings Card substrate for HP Indigo 7000

Hi,
For this kind of thing, you need to contact HP Indigo support,
http://h10088.www1.hp.com/cda/gap/display/main/index.jsp?zn=gap&cp=20000-22929-22931_4041_100_

Thanks.
-----------------------------------------------------------------------------------------------------------------------------------------
** If found useful, please assign kudos located at the left hand side.
Thanks.

Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Please use plain text.
Occasional Visitor
gossylad
Posts: 2
Registered: ‎09-11-2010
Message 3 of 3 (1,585 Views)

Re: Greetings Card substrate for HP Indigo 7000

Hi, we use a 280gram board called Condat Digital 1s. It is a 1 sided gloss board, which we print fronts on the gloss side and then uv coat the front.

 

Use it everyday on 7000's, runs fine, don't have any probs except the odd pip scratch. However, use it on a 5000 and after a while you will get blanket memory on the rough side.

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation