04-19-2000 03:43 AM
re-booted server it stops on the following message on LCD display of the
PRI CNSL 012345
04-19-2000 05:20 AM
while booting the system.
This answer is available with better documentation by searching the Technical
Knowledge Database on INIT C440.
04-19-2000 03:18 PM
To 'refresh' the info, you'll have to reset the console :
1. Power off the console.
2. Hold down the "d"-key and power on the console again.
3. Count to 10 and release.
The boot messages should display on the console and the system should resume
I don't think you are using a web-console, as you mentioned 'LCD screen on the
server'. If you ever gonna use it, and you receive the same error, just power
cycle the web-console and that will reset it.
If you hold down the reset button on the web console, that will clear all
settings so you don't want to do that.
06-08-2000 04:20 PM
If this still doesn't work.. take an old 928 (if you have any), plug it into the console port, and then do CTL + X.
I used to have to do the same to clear ports.