NFS server not responding (348 Views)
Reply
Occasional Visitor
Achilleas Nikolaou_1
Posts: 2
Registered: ‎04-25-2000
Message 1 of 6 (348 Views)

NFS server not responding

Hello,

I'm trying to mount an Oracle CD-ROM on a stand-alone
HPUX 11 server.

I know that the oracle CD format is Rockridge and that
I have to use pfs_mount. I'm following the steps below.

1. Ensure NFS is running
# rpcinfo -p
(NFS and mountd are running)
2. create /etc/pfs_fstab file with entry:
/dev/dsk/c2t2d0 /SD_CDROM pfs-rrip xlat=unix 0
3. Load pfs background processes
# pfs_mountd &
# pfsd&
4. Ensure the processes are running
# ps -ef|grep pfs
5. Try to mount the CD-ROM
# pfs_mount /SD_CDROM

NFS server tngtest1 not responding still trying
NFS server tngtest1 not responding still trying
NFS server tngtest1 not responding still trying
.
.
.
That goes on forever and I have to kill the session
without the CD-ROM to be mounted.
Any help will be appreciated.
Thanks
Achilleas Nikolaou
Advisor
Kondala Raju
Posts: 10
Registered: ‎03-16-2000
Message 2 of 6 (348 Views)

Re: NFS server not responding

Hi ,
1.If you want to mount CD on ur own system you dont need to use nfs .
2.So you can use mount -F CDFS -o ro /dev/dsk/c??? /cdorm .
Occasional Visitor
Achilleas Nikolaou_1
Posts: 2
Registered: ‎04-25-2000
Message 3 of 6 (348 Views)

Re: NFS server not responding

Thanks.

However, I need to use pfs that uses nfs in order to mount the Oracle CD since
it is in Rockridge format.
Occasional Visitor
Ahmed Ibrahim_1
Posts: 1
Registered: ‎10-10-1999
Message 4 of 6 (348 Views)

Re: NFS server not responding

Hi,

I hope it is resolved but it not try this i hope it will help.

1)modify the /pfs_fstab file with the following :
/dev/dsk/c2t2d0 /SD_CDROM pfs-rrip xlat=unix 0 0

2)Load pfs background processes
#nohup /usr/sbin/pfs_mountd &
#nohup /usr/sbin/pfsd &
3)Check if process running

4) mount cdrom
#pfs_mount -o xlat=unix /dev/rdks/c2t2d0 /SD_CDROM

Regards

Ahmed

Occasional Advisor
S. Karunanidhi
Posts: 16
Registered: ‎09-30-1999
Message 5 of 6 (348 Views)

Re: NFS server not responding

Hi!
Start /usr/sbin/pfs_mountd.rpc also.
A simple way which I use to mount the Oracle CDROM is,

#/usr/sbin/pfs_mountd.rpc &
#/usr/sbin/pfs_moutd &
#/usr/sbin/pfsd &
#/usr/sbin/pfs_mount /dev/dsk/c0t0d0 /cdrom

This should solve your problem.(NOte that I have not used /etc/pfs_fstab)

Regards,
- Karunanidhi.S
Karunanidhi.S
Occasional Advisor
Navied Yousuf
Posts: 7
Registered: ‎10-30-1997
Message 6 of 6 (348 Views)

Re: NFS server not responding

Greetings,

PFS uses rpc to function so does NFS. For PFS to function correctly you don't need NFS running, however you need mountd rpc daemon running. It can be started either from nfsconf (in /etc/rc.config.d dir) or from /etc/inetd.conf file but not from both places.
You should not start pfs_mountd.rpc manually as suggested in one of the response. pfs_mountd and pfsd startd their rpc counterparts.

I suggest creating pfs startup/shutdown scripts. This way you can circumvent any problems when starting pfs daemons. You can also start/stop pfs just by executing pfs start or pfs stop.
I noticed when I start pfs_mount command (see below) with soft and intr options,it can be interrupted.
pfs_mount -t rrip -x unix -o retry=3,soft,intr /dev/dsk/cxtydz /CDROM
Note retry has been changed from default value of 10000 to 3. This try mount operation three times.

NY
Knowledge is useless unless shared.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.