INFORMIX 731.UC2 - OMNI BACK 3.00 (75 Views)
Reply
Occasional Visitor
VALERIANO VILLEGAS JUAN
Posts: 1
Registered: ‎05-23-2000
Message 1 of 2 (75 Views)

INFORMIX 731.UC2 - OMNI BACK 3.00

I HAVE A PROBLEM WHEN I MAKE RESTORE WITH OMNI-BACK

0:50:19 Physical Restore of rltab5 Completed.
10:50:19 Checkpoint Completed: duration was 0 seconds.
10:50:53 Checkpoint Completed: duration was 0 seconds.
10:50:54 Physical Restore of rltab3 Completed.
10:50:54 Checkpoint Completed: duration was 0 seconds.
10:51:04 Checkpoint Completed: duration was 0 seconds.
10:51:04 Physical Restore of rltab6 Completed.
10:51:04 Checkpoint Completed: duration was 0 seconds.
10:51:04 Logical Recovery Started.
10:51:05 Checkpoint Completed: duration was 0 seconds.
10:51:05 Start Logical Recovery - Start Log 4468, End Log ?
10:51:05 Starting Log Position - 4468 0x5b0e190
11:17:19 DBspace rllog1 not recovered from same archive backup as DBspace rootd
bs.

11:17:19 Cannot change to Quiescent Mode.

COULD SOMEBODY HELP ME ?
infiernix
Please use plain text.
Advisor
Ivan Coenegrachts
Posts: 12
Registered: ‎03-05-2000
Message 2 of 2 (75 Views)

Re: INFORMIX 731.UC2 - OMNI BACK 3.00

Is it possible you did a restore of the root DBspace or a DBspace containing the physical log or a logical log file ? If so, you have to physically restore the root DBspace and ALL DBspaces containing a logical or physical log file as well.

As OmniBack does not control the backup (it doesn't decide what to recover), but passes parameters to "onbar", I would suggest using the command (f.e. "onbar -r" for full restore ; check the manuals).

Hope this helps ...
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation