Re: Linux Client <> Windows CM <> Linux IS problem: SSH [Warning] (1132 Views)
Reply
Occasional Collector
ms_seraph
Posts: 2
Registered: ‎10-18-2012
Message 1 of 5 (1,238 Views)

Linux Client <> Windows CM <> Linux IS problem: SSH [Warning]

So I been  trying to install per CM on the Linux host - I am getting the above error, I did however enable the SSH and encryption in the corresponding omnirc files. Also setup the key/pair auth & all fqdn are working as expected.

 

Setup:

 

Windows CM is on the same domain as the Linux IS

the Client is the only one outside that domain.
 They can reach each other over ip and fqdn.

Telnet 5555 works on IS and CM.

 

Error CM:

 

[Warning] Could not use secure shell protocol, instead using rexec and rcp commands...

 

Trying "ob2install" directly from the Linux IS:

 

./ob2install -server itsdpma01.its.local -input heshbec
Sending installation data to binary master on itsdpma01.its.local
**********************  DEFAULT ERROR REPORT  *******************************
15 [12:1] [2002] 1350483994 OB2INSTALL itsdpma01      You have no permission to install client heshbec.ptxgrp.de -da A.07.00 -dr A.07.00 in cell itsdpcm01.its.local! *****************************************************************************

**********************  DEFAULT ERROR REPORT  *******************************
15 [12:1] [2003] 1350483994 OB2INSTALL itsdpma01      No host to install!
        Aborting. *****************************************************************************

Trying the forumpost on zcat doesn't work:

 

zcat packet.Z > /tmp/OB2-CORE-A.06.11-1.x86_64.rpm
gzip: packet.Z: not in gzip format

 

Solution: ???

 

Any help would be greately appreciated!

Trusted Contributor
jruffer
Posts: 184
Registered: ‎06-28-2011
Message 2 of 5 (1,229 Views)

Re: Linux Client <> Windows CM <> Linux IS problem: SSH [Warning]

file packet.Z should tell you what format it is in.

 

Jeremy

Occasional Collector
ms_seraph
Posts: 2
Registered: ‎10-18-2012
Message 3 of 5 (1,222 Views)

Re: Linux Client <> Windows CM <> Linux IS problem: SSH [Warning]

[ Edited ]

packet.Z: RPM v3 bin i386 OB2-CORE-A.07.00-1

 

So it is already a RPM file? I should be able to install directly with this - shouldn't I ? Simply renaming it?

Trusted Contributor
jruffer
Posts: 184
Registered: ‎06-28-2011
Message 4 of 5 (1,218 Views)

Re: Linux Client <> Windows CM <> Linux IS problem: SSH [Warning]

Worth a try.

 

Jeremy

Honored Contributor
Jan Soska
Posts: 1,255
Registered: ‎01-22-2008
Message 5 of 5 (1,132 Views)

Re: Linux Client <> Windows CM <> Linux IS problem: SSH [Warning]

hello,

in our case problem was with enabled OB2_ENCRYPT_PVT_KEY =1 in .omnirc file at linux IS (which means encrypted prived key, generally not common). After disabling this and restarting xinetd remote linux DB agent instalation works great.

 

Jan

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.